Flow meter

Verabar flowmeters are suitable for high-precision flow measurement of gases, liquids and steam. Verabar is a differential pressure, rate averaging flow sensor that measures flow through the differential pressure generated by the sensor in the fluid. The real flow rate of Verabar reaction fluid, its accuracy is ±1.0%, and its repeatability is ±0.1%.

The outstanding advantage of Verabar is that it outputs a very stable, pulsation-free differential pressure signal.

Main features of Verabar flowmeter:

◆It can measure a variety of media and has a wide range of applications.

◆High precision and large range ratio.

◆The probe pressure-taking hole is essentially anti-blocking.

◆The measurement signal is stable and the fluctuation is small.

◆The permanent pressure loss of the pipeline is low.

◆Unique high-strength bullet-shaped single-piece double-chamber structure.

◆Low installation cost and basically maintenance-free.

◆It can be installed and repaired online.

Main technical parameters of Verabar flowmeter:

◆Measurement accuracy: ±1%

◆Applicable pressure: 0-40MPa

◆Applicable temperature: -180℃~+550℃

◆ Turndown ratio: greater than 10:1

◆Applicable pipe diameter: 40mm-9000mm round pipe, square pipe

◆Applicable medium: full tube, one-way flow, single-phase gas, steam and liquid with viscosity not more than 10 centipoise

Verabar has an extremely wide range of applications, and it is widely used in the measurement of various gases, liquids and vapors.