Infrared Thermometer

XG20L series online infrared thermometer

1. Basic introduction

The infrared temperature sensor can calculate the surface temperature of the object by measuring the infrared radiation intensity emitted by the target without touching the target. Non-contact temperature measurement is the biggest advantage of infrared thermometers, allowing users to easily measure targets that are difficult to approach or move.

XG20L series online infrared thermometer is an integrated integrated infrared temperature sensor. The sensor, optical system and electronic circuit are integrated in the stainless steel shell; CS20L series is easy to install, and the standard thread on the metal shell can be quickly connected to the installation site; At the same time, CS20L series also has various types of options (such as purgers, mounting brackets, adjustable mounting brackets, purge protective sleeves, etc.) to meet the requirements of various working conditions.

2 Parameter description

2.1 Basic performance

Protection class IP65 (NEMA-4)

Ambient temperature 0-60℃

Storage temperature -20-80℃

Relative humidity 10-95% (non-condensing)

material stainless steel

Cable length 1.5m (standard), other special specifications (customized)

2.2 Electrical parameters

Working power 9-32VDC

Maximum voltage 50mA

Output signal 4-20mA

2.3 Measurement parameters

Spectral range 8-14μm

Temperature range 0-100/ 0-200/ 0-300/ 0-500/ 0-600/ 0-800/ 0-1000/ 0-1200℃

Optical Resolution 20:1

Response time 150ms (95%)

Temperature measurement accuracy ±1% ±1.5°C of the measured value, whichever is greater

Repeatability ±0.5% ±1°C of the measured value, whichever is greater

Size 113mm*φ18mm (length*diameter)

Emissivity 0.95 (factory preset)